Skip to main content
CalcPro

Coordinate Measuring Machine (CMM) ISO 10360 MPE Error Calculator

Easily calculate and compute coordinate measuring machine (cmm) iso 10360 mpe error calculator with accurate equations, live formulas, and expert guidance.

Baseline geometric and probing uncertainty (e.g. 1.5 to 2.5 µm).

Denominator in length formula (e.g. L/300 or L/350).

Length between measured feature points.

Total bilateral drawing tolerance (e.g. ±0.020 mm = 0.040 mm).

Calculated Result
3.3 µm

MPE_E

MPE_E

3.3 µm

Max Permissible Error Mpe Um

3.3

Max Permissible Error Mpe Mm

0.0033

Test Uncertainty Ratio Tur

6.1

Mpe Share Of Part Tolerance Pct

8.3

3.3 — µm

Calculation Breakdown

  1. Applied FormulaCalculates the Maximum Permissible Error of indication (MPE_E) for CMM length measurements per ISO 10360-2 and evaluates the Test Uncertainty Ratio (TUR).MPE_E = A + \frac{L}{K}, \quad TUR = \frac{T}{2 \cdot MPE_E}

CMM ISO 10360 MPE Metric Output

Interactive visualization based on your current inputs

Calculated Value
0.00.81.62.53.3MPE_E

What Is the Coordinate Measuring Machine (CMM) ISO 10360 MPE Error Calculator?

This tool computes coordinate measuring machine (cmm) iso 10360 mpe error calculator with high precision arithmetic.

How Does the Coordinate Measuring Machine (CMM) ISO 10360 MPE Error Calculator Work?

Calculates the Maximum Permissible Error of indication (MPE_E) for CMM length measurements per ISO 10360-2 and evaluates the Test Uncertainty Ratio (TUR).

Coordinate Measuring Machine (CMM) ISO 10360 MPE Error Calculator Formula & Variables

The core mathematical equation utilized by this calculator is expressed as:

MPEE=A+LK,TUR=T2⋅MPEEMPE_E = A + \frac{L}{K}, \quad TUR = \frac{T}{2 \cdot MPE_E}

Calculates the Maximum Permissible Error of indication (MPE_E) for CMM length measurements per ISO 10360-2 and evaluates the Test Uncertainty Ratio (TUR).

How to Use the Coordinate Measuring Machine (CMM) ISO 10360 MPE Error Calculator

  1. Enter your parameters into the designated input fields to calculate the result immediately.

Step-by-Step Example Calculation

Coordinate Measuring Machine (CMM) ISO 10360 MPE Error Calculator Example

Input Values:

constantErrorTermA:1.8
lengthDependentSlopeK:300
measuredLengthMm:450
partToleranceBandMm:0.04
Worked Steps: Sample evaluation based on standard reference conditions.

Understanding Your Result

The calculated primary figure indicates the optimal or required µm.

Factors That Affect the Result

  • Measurement tolerances, operational variance, and real-world conditions.

When Should You Use This Calculator?

  • Everyday budgeting, technical homework, professional estimation, and household projects.

Assumptions & Limitations

  • Assumes standard atmospheric or environmental parameters unless specified.

Frequently Asked Questions

Calculation Accuracy & Reference Note

Double-precision IEEE 754 arithmetic with validated empirical constants.

\n

Related Calculators

Explore more tools and calculators in Technology Calculators

Length Converter

Convert length and distance between metric and imperial units including meters, feet, inches, kilometers, miles, and yards with exact SI definitions.

Percentage Calculator

Calculate percentages: what % X is of Y, P% of X, % change, discount price, and percentage points.

Temperature Converter

Convert temperatures between Celsius (°C), Fahrenheit (°F), Kelvin (K), and Rankine (°R) with step-by-step thermodynamic formulas.

Wien Bridge Oscillator Frequency & Barkhausen Stability Calculator

Calculates the oscillation frequency f₀, non-inverting op-amp voltage gain A_v, and verifies Barkhausen stability criterion for Wien bridge circuits.

Schmitt Trigger Inverting Comparator Hysteresis Thresholds Calculator

Calculates the upper trip point (V_TP), lower trip point (V_TN), and hysteresis voltage band V_H for inverting op-amp Schmitt trigger circuits.

Active Sallen-Key 2nd-Order Low-Pass Filter Cutoff & Q Calculator

Calculates the corner cutoff frequency f_c, quality factor Q, damping factor ζ, and response shape (Butterworth, Bessel, Chebyshev) for Sallen-Key low-pass filters.